As the search for new drilling opportunities in the Permian Basin continues, more operators are investigating lesser-developed formations and the basin’s outer edges. While the Spraberry and Wolfcamp intervals in the Midland Basin remain primary targets, operators are increasingly exploring deeper zones and fringe areas. Recent filings with the Texas Railroad Commission (RRC) indicate a rise in drilling and permitting activity in less-targeted formations like the Barnett Shale and Woodford formations.
In2023,PioneerNaturalResourcesbegantestingtheseformations,identifying thousands of potential drilling locations. Meanwhile,Elevation Resources focused its efforts on the Barnett Shale,refining its drilling techniques to improve the economic viability ofthisgas-proneformation.CEOStevePruetthighlightedthatalthoughtheBarnettproducesmoregasthantheWolfcamp, ithastheadvantageoflowerwaterproduction,makingthewells morecost-efficient.
ContinentalResourcesalsoenteredthescene,acquiringMidland BasinacreagetoexploretheBarnettShale,joiningtheranks of other operators like Diamondback, Occidental, Marathon,andSMEnergy.Thesecompaniesareexploringdeepertargets intheBarnettasacomplementtotheirexistingoperationsintheSpraberry and Wolfcamp formations. SM Energy has reportedpromising results from two new wells targeting the Barnett and Woodford Shales, indicating the potential for significantdevelopment across 20,000 net acres of deeper oil reservoirs.Atthesametime,VitalEnergyhasalsoreporteddrillingfourwellsin the region, with flowback just beginning. The Midland Barnett isparticularlyattractiveduetoitshigheroilcuts,averagingabout65%, compared to the Fort Worth Barnett, drawing increasedinterest from operators across the region.
ProductionHistoryoftheBarnettShale
Approximately 20 years ago, the shale revolution began in the Fort Worth Basin, where the Barnett Shale became one of the largest onshore natural gas fields in the U.S. The Barnett Shale, often called the “grandfather” of U.S. shale plays, was the first formation where Mitchell Energy & Development unlocked shale gas using hydraulic fracturing. As the revolution moved west to the Permian Basin, efforts to fully unlock Barnett’s potential faced challenges. However, producers successfully adapted the technological advances in horizontal drilling and hydraulic fracturing from the Barnett to the Spraberry, Wolfcamp, and Bone Spring formations, driving the Permian’s production to a record 6.1 million barrels per day (bbl/d), according to TGS Well Data Analytics. As the top tier undeveloped acreage across the basin dwindles, operators are now revisiting the Barnett Shale, specifically in the Midland Basin, as a promising new target.
According to TGS Well Data Analytics, about 100 wells have been tested in the Midland Barnett since 2016, with production growing to nearly 25,000 barrels of oil equivalent per day (boe/d) by the end of 2023. As shown in Figure 1, on a barrels of oil equivalent per foot (boe/ft) of lateral length basis, Barnett wells reported a peak monthly rate of 2.9 boe/ft versus 2.2 boe/ft from Spraberry wells and 1.3 boe/ft from Wolfcamp wells. Over the life of production, the Barnett also exhibits a shallower decline rate and a higher EUR/ft, 10% higher than the Spraberry and 25% higher than the Wolfcamp. Although the Barnett produces a higher GOR, the water cut produced is much lower, averaging 44% compared to 64% and 74% for the Spraberry and Wolfcamp, respectively.
GeologyoftheBarnettShale
The Barnett Shale represents the Chesterian-Meramecian Mississippian transgressive sedimentary sequence in the Permian Basin as shown in Figure 2. TGS has interpreted over 60,000 wells across the Greater Permian Basin and has mapped nearly 7,000 Barnett penetrations. A north-to-south stratigraphic section of the Mississippian and Devonian strata, flattened on the Woodford Shale, highlights the stratigraphic architecture of the Barnett Shale and Mississippian Limestones. Mapping reveals that the Barnett is broadly distributed across the Permian Basin as shown in Figure 4 and is thickest in the deeper cores of the Delaware and Midland Basins, while it has been eroded along the broader highs of the Central Basin Platform.
TheImportanceof3DSeismicforBarnettExploration
The Barnett Shale is located along the complex margin between the Central Basin Platform and Midland Basin. To accurately steer and land horizontal wells targeting the Barnett, a high-resolution understanding of the structural geology is essential, and 3D seismic data plays a critical role.
TGS completed the Block 1 3D seismic survey in 2019, covering 51 square miles in Andrews County. In early 2023, TGS also launched the Pontiac 3D seismic survey, spanning 167 square miles across Ector, Crane, Midland, and Upton Counties. Later that year, the survey was extended into Ector and Midland Counties, increasing its coverage to 267 square miles. These seismic surveys provide operators with enhanced visibility into deeper hydrocarbon accumulations in the Barnett, Mississippian, and Devonian formations. Insights from the Block 1 3D survey have already led to profitable Barnett wells, and future production growth is expected as more wells are drilled in these formations.
Wells targeting the deeper Mississippian-Ordovician section are sparsely spread across the basin, and boreholes are typically concentrated on the crests of producing structures. The application of 3D seismic data will significantly enhance both the structural and stratigraphic framework of the play. In areas where the Block 1 3D and Pontiac 3D seismic surveys have been conducted, structure maps derived from seismic data have provided a significant uplift in the accuracy of structural interpretations compared to well-only data (Figure 7 & Figure 8).
A similar analysis of the wells located within newest TGS 3D seismic survey, Pontiac 3D, reveals that most wells within this area are older and targeted the Spraberry and Wolfcamp formations, with only a few recent completions in the Barnett Shale (Figure 11). Figure 12 presents the production type curves for this area, grouped by landing zones. Despite the limited number of recent Barnett completions, these wells show significantly higher daily oil production and lower water cuts compared to wells in shallower formations. This suggests that operators can capitalize on the modern, high-resolution Pontiac 3D seismic survey to identify deeper, more economical formations like the Barnett, thereby boosting profitability.
