When it comes to prospecting for hydrocarbon-bearing rock formations at the basin level, geologists utilize net reservoir maps to help define fluid-rich intervals within geological units.
To develop an effective net reservoir map, knowledge of what geological properties separate productive rock from non-productive rock is essential. Positive production trends can be associated with geologic parameters to identify characteristics with the most influence on reservoir quality and well results. These relationships can be taken a step further by tying specific well log signature cut-offs to production estimations. These cut-offs, as observed by the dashed lines in Figure 1, provide a benchmark for geologists to use in their attempt to differentiate hydrocarbon-bearing intervals from non-hydrocarbon-bearing intervals. These can be both positive and negative relationships.
The application of these cut-offs to each respective geological property highlights the vertical intervals within a formation that correspond to promising reservoir rock. Net reservoir is defined by observing regions where this reservoir rock, as suggested by each property, overlaps in depth. This interval is represented by the green blocks in the chart.
Mapping the thickness of overlapping cut-offs across all the available data points in the basin provides quick insight into the most promising future drilling locations, with more granularity than your average top-to-bottom averaging exercise.
FIGURE 1 | Net Pay Type Log
RS Energy Group Disclosure Statement:
© Copyright 2020 RS Energy Group Canada, Inc. (RSEG). All rights reserved.
All trademarks, service marks and logos used in this document are proprietary to RSEG. This document should not be copied, distributed or reproduced, in whole or in part. The material presented is provided for information purposes only and is not to be used or considered as a recommendation to buy, hold or sell any securities or other financial instruments. Information contained herein has been compiled by RSEG and prepared from various public and industry sources that we believe to be reliable, but no representation or warranty, expressed or implied is made by RSEG, its affiliates or any other person as to the accuracy or completeness of the information. Such information is provided with the expectation that it will be viewed as part of a mosaic of analysis and should not be relied upon on a stand-alone basis. Any opinions expressed herein reflect the judgment of RSEG as of the date of this document and are subject to change at any time as new or additional data and information is received and analyzed. RSEG undertakes no duty to update this information, or to provide supplemental information to anyone viewing this material. To the full extent provided by law, neither RSEG nor any of its affiliates, nor any other person accepts any liability whatsoever for any direct or consequential loss arising from any use of the information contained herein. The recipient assumes all risks and liability with regard to any use or application of the data included herein.
Caution Regarding Forward-Looking Statements:
This public communication may contain forward-looking statements within the meaning of the Securities Act of 1933, as amended, and the Securities Exchange Act of 1934, as amended. These statements are based on our current expectations about future events or future financial performance. In this context, forward-looking statements often contain words such as “expect,” “anticipate,” “intend,” “plan,” “believe,” “seek,” “see,” “will,” “would,” or “target” or other words that convey uncertainty of future events or outcomes.
These statements involve known and unknown risks and uncertainties that may cause the events we discuss not to occur or to differ significantly from what we expect. When evaluating the information included in this communication, you are cautioned not to place undue reliance on these forward-looking statements, which reflect our judgment only as of the date hereof. We undertake no obligation to publicly revise or update these forward-looking statements to reflect events and circumstances that arise after the date hereof.
Note to UK Persons:
RSEG is not an authorised person as defined in the UK’s Financial Services and Markets Act 2000 (“FSMA”) and the content of this report has not been approved by such an authorised person. You will accordingly not be able to rely upon most of the rules made under FSMA for the protection of clients of financial services businesses, and you will not have the benefit of the UK’s Financial Services Compensation Scheme. This document is only directed at (a) persons who have professional experience in matters relating to investments (being ‘investment professionals’ within the meaning of Article 19(5) of the Financial Services and Markets Act 2000 (Financial Promotion) Order 2005 (the “FPO”)), and (b) High net worth companies, trusts etc of a type described in Article 49(2) of the FPO (all such persons being “relevant persons”). RSEG’s services are available only to relevant persons and will be engaged in only with relevant persons. This report must not be acted or relied upon by persons who are not relevant persons. Persons of a type described in Article 49(2) of the FPO comprise (a) any body corporate which has, or which is a member of the same group as an undertaking which has, a called up share capital or net assets of not less than ( i ) in the case of a body corporate which has more than 20 members or is a subsidiary undertaking of an undertaking which has more than 20 members, £500,000 and (ii) in any other case, £5 million, (b) any unincorporated association or partnership which has net assets of not less than £5 million, (c) the trustee of a high value trust within the meaning of Article 49(6) of the FPO and (d) any person (‘A’) whilst acting in the capacity of director, officer or employee of a person (‘B’) falling within any of (a), (b) or (c) above where A’s responsibilities, when acting in that capacity, involve him in B’s engaging in investment activity.
Latest posts by Enverus (see all)
- Enverus Launches Next Generation CurveBuilder Technology - October 27, 2020
- Midstream Exposure to Federal Lands - October 26, 2020
- ConocoPhillips acquires Concho Resources for $13.3 billion in the largest pure shale deal since 2011 - October 21, 2020