Blog Topics Current Article


byEric Roach

After drilling and casing your well, the next phase in well completion is perforation. Just as drilling and casing happen together, best practices in today’s oil field involve an “underbalanced” downhole environment, and thus, have the perforation happening in tandem with the installation of production tubing and packing.

Workover Rigs

This phase of the completion is usually done with a “workover” rig. Workover rigs are smaller rigs that more easily, efficiently and cheaply can deal with downhole operations both on tubing and wireline. This video shows a workover rig, and gives a good idea of the theory and scale of using workover rigs.


Before I get too far into this post, I do need to point out that I am not a petroleum engineer – I am simply someone who is very interested in the engineering that goes into wells so I can be more knowledgeable about the industry.

At Drillinginfo we have a lot of data and analyses that focus on operator performance and efficiency – as we should. The days of the 3 million dollar wildcat gusher are gone, and have been replaced with quarter of a million dollar pad development. Rather than counting on exceptional results for better ROI, we know that predictable efficiency and the associated cost savings are where the smart money is to be made in the unconventional world.

So when the next “game-changing efficiency” gets developed, for my job I need to know 1: what game is being changed, and 2: what is functionally different. This post is some of the information I have gathered from my research – if you would like a more detailed look into perforation design, has a great breakdown.

Well Perforation

You need to perforate the casing and do the appropriate amount of damage to the surrounding formation – too much damage can create excess debris (which can cause problems with downhole operations) and not enough can limit your productivity.

Normally, there are 4 to 8 holes perforated per foot and those perforations are done in a certain spread around the diameter of the hole – most commonly 60, 90 and 120 degrees (resulting in six, four or three different directions).

well completion well perforation
Image Source:

The process consists of plugging the target section, flooding the casing with the appropriate fluid at the appropriate pressure, and then exploding the charges. “Underbalanced” indicates that the pressure is slightly less than the surrounding formation, which is advantageous in the process as it immediately starts removing debris from the area around the perf. Here is a great animation of a perforation gun in action:

“Perforated Length” and “Entrance Hole Diameter” are two commonly discussed elements of perforating design. To control these elements, the shape and blasting power of the charges are attenuated.

Well-Perforation-Shape-Charges well completion well perforation
Image: A Variety of Shape Charges from

Tubing and Packing

As I indicated above, other processes are undertaken during the perforation phase, most notably running your production tubing and then gravel packing.

This animation shows coiled tubing on a special workover rig, and you can see how much more efficient coiled tubing can be in some cases.

After you have run production tubing (through which the hydrocarbons will flow to the surface) into the casing, you must pack the space in between this tubing and the casing.

well perforation tubing well completion well perforation

This video from Baker Hughes shows the packing better than I can explain:

Natural completion in Conventional Drilling

In Conventional Drilling in a porous formation, the completion is now done, and you can rig up your Christmas tree or pump and start flowing – this is what they call a “natural completion.” In unconventional exploration or tight formations, you’re ready to move on to the next stage – well stimulation – which we will cover in our next post.

Eric Roach

Eric Roach

Eric Roach is the editor of Drillinginfo's blog, which was selected as the Top Oil & Gas Industry Blog based on visibility, engagement and relevance. He also prepares a weekly newsletter of top industry news for blog subscribers, and would be grateful if you would subscribe and tell your friends. (There's a box on the upper right of the page where you can subscribe).

Subscribe to the Enverus Blog

A weekly update on the latest “no-fluff” insight and analysis of the energy industry.

Related Content

Energy Analytics Other
ByShane Reddell

In the current landscape of heightened environmental and social consciousness, upstream oil and gas companies face significant challenges in achieving favorable refinancing for their existing credit facilities. These challenges are compounded by the recent volatility in the debt markets and...

Energy Analytics Intelligence Publications
ByMaurice Smith

Wildfires that have already scorched more than double the average annual fire destruction across Alberta forced the shut-in of more than 300,000 boe/d while threatening future shuttering of output from the so-far largely unaffected oil sands region. Record temperatures saw...

Energy Analytics Energy Transition
ByHeather Leahey

CO2 containment risk has become one of the most popular topics among our clients evaluating CCUS projects. Operators need to understand and evaluate subsurface features that could trigger CO2 migration and containment losses as well as introduce additional safety, reputational...

Energy Analytics Energy Transition
ByRyan Luther

Anyone who thinks spending time at a public charging station is a blocker to buying an electric vehicle (EV) might want to consider the numbers behind EV and internal combustion engine (ICE) vehicle refueling times. The answer is that it...

Enverus Blog - 6 tax preparation tips for mineral and royalty managers
Energy Analytics
BySilas Martin

Recent years have been a roller coaster for mineral buyers, from record low commodity prices to highs for oil and natural gas in the last year. Going forward, challenges and opportunities will be plentiful. We expect oil prices between $80...

Power and Renewables
ByKenneth Curtis

It’s that time of year when generator and transmission outages are at their peak in PJM. The first half of April has not disappointed volatility-wise as the WHUB/NIHUB spread has set new 30-day highs largely driven by congestion. Figure 1:...

Enverus Blog - April's energy outlook: Analyst insights you can't miss
Analyst Takes Energy Analytics
ByChris Griggs

May marks a new month, and it’s essential to assess the energy landscape of April. Our Enverus Intelligence® | Research (EIR) team has scrutinized critical trends and advancements, delivering to you insightful analyst takes that can shape your business decisions....

Energy Analytics
ByCayley Krynowsky

Inventory is king in 2023. Operators and investors alike are more concerned than ever about remaining inventory – who has it, where is it, and will it be economic? To answer these questions, most turn to the tried-and-true, but also...

Enverus Blog - Securing domestic supply of lithium
Energy Analytics Energy Transition
ByGraham Bain

In last week’s issue of Energy Transition Today, we discussed the significant drop in solar capture prices in California over the past five years. This decline presents a valuable opportunity for solar projects to utilize co-located battery storage, charging them...

Let’s get started!

We’ll follow up right away to show you a quick product tour.

Let’s get started!

We’ll follow up right away to show you a quick product tour.

Sign up for our Blog

Speak to an Expert

Book a Demo